Stuc-O-Flex - The Ultimate Exterior Finish for Concrete Based Buildings....
Stuc-O-Flex is a commercial grade tried and tested "rubberized" product for exterior or interior finishing. Think about it...You can build with block, Concrete or 3-D panel, or even Quad-Loc foam blocks, but in the end you need to have a durable finish that resists sun, sand, and the eventual cracking of all "cement" based products.
Now there is Stuc-O-Flex - Imported into Mexico in various colors by QBiltHomes. This coating has huge advantages over all other finishes.
​
Characteristics
-
Maximum Crack Coverage & Bridging Abilities. Super Elongation Characteristics.
-
Breathable (WVT) = 13 Perms Average
-
Calcium - Marble Aggregates (Prevents Rust)
-
No Silica Sand
-
Coating Integrity - Exceeds 30 Year Exposure
-
Comprehensive ASTM Third Party Testing
-
America's First Elastomeric Acrylic Finish
-
500 Million Square Feet in Service Worldwide
-
Equally Effective Regardless of Climate
-
(-70°F to 180°F)
-
Class A Fire Rated
-
New Construction, Retrofit or Repair
Hufman Renovation Project, Todos Santos.
Stuc-O-Flex Product Features
​
-
Stuc-O-Flex is a water-based material - easy clean up while wet with soap and water.
-
Stuc-O-Flex is safe, similar to water base latex paint.
-
Easy to apply by trowel, or appropriate spray equipment.
-
Stuc-O-Flex is available in twenty (20) standard colors; over 10,000 computer generated special colors.
-
Uses include renovation, repair and new construction.
-
Stuc-O-Flex is chemical resistant against mineral spirits, paint thinner, muratic acid, etc...
-
Stuc-O-Flex can be painted with an acrylic latex paint or Stuc-O-Flex Renew at a later point in time to change the color if desired. Designs can also be painted over Stuc-O-Flex after drying.
-
Applications to most common construction surfaces.
-
Provides a noise reduction coefficient reducing decibel levels when applied to interior walls including restaurants, movie theaters, shopping centers, office buildings, etc...
-
Minimum maintenance required after installation - Wash walls with appropriate power washer or by hand as required.
-
Outstanding color consistency & color retention.
-
Unlimited textures opportunities in four different sized aggregate choices.
-
Building code compliant.
-
Stuc-O-Flex is a breathable membrane- 10 -14 perms average (H2O vapor transmission)
-
Dries in 12 - 24 hours, complete cure in approximately 2 weeks.
-
Provides outstanding hiding power against shadowing from substrate below.
-
Outstanding resistance to environmental impact: freeze - thaw cycles, salt spray, wind driven rain, abrasion & chemical resistance, color retention, UV radiation.
-
A preservative system in the Stuc-O-Flex Finish resists mold & mildew growth.
​
Stuc-O-Flex and RENEW
Colors and Textures
SUPER EASY TO APPLY !
